Crochet Heart and Bow ♥

 Crochet heart and bow ♥

  

1. Crochet 10kjs + 1kjs for reversal.

2. Crochet back and forth on the fixed loops (which line will always 10Ks + 1kjs turn with) with a total of 38kerrosta.

3. Cut the wire, leaving little room for sewing with a needle and sew the ends together.

4. Fold the bow in such a way that the sewing position in the middle of the back.

5. Start kieputtamaan the center of the yarn around a bow at the same time a little tightening until the center is a suitable thick. Finally Tie the threads behind the bow tie knot and fasten yarn bow on the inside.

 6. Rusettisi is ready!

Crochet and filled the heart: 

 

1. Crochet 1kjs + 1kjs for reversal.

2. Crochet 1 dc in the first chain loop + 1kjs again for the reversal. Turn the piece and crochet at the same 2KS just crochet a fixed loop + 1kjs for reversal. 

3. Crochet a total of 14 layers, so that a layer crochet the last fixed loop 2KS the same loop, ie a layer of stitches is increased by one, see. (This is where the heart can easily be increased by making the triangle bigger, the last layer should only be an even number!).

4. Turn the piece and crochet 7ks.

5. Turn the work again and finish the first two fixed stitches together, continue to the end of the normal layer. Reduce this at the beginning of the layer 1 dc in the round with the first two together until there is 3KS. Cut the thread.

6. Crochet second cusp of the heart as well as the first, starting from the outer heel.

7. Crochet another similar heart. You can at this point to draw a heart on the front piece, for example, a bow, button or what ever invented either by stitching it to the wrong side of the stick.
8. Set the hearts of the opposition as well, and start combining kekseltä bottom. Do 1kjs + 2KS the same loop. Crochet threads at the same reasoning from further reasoning from which the loops in the solid saves.
9 along the edge of the fixed Continue sts. Make sure that the edges of the cores remain aligned.
10 on the top of the central loop of the claw is made ​​2KS the same loop, otherwise proceed as above.
11. Start with a heart full when you're the last half of the edge of the slot.
12. Crochet end of the edge and make a further 1 dc in the same loop where you started + 1piilosilmukka first fixed loop, cut the thread and pull through the loop. Conclude and your heart is ready.