When any product with any form yoke we need to build the pattern in natural (or scaled) value, and then applied to the pattern through its yoke.
Then we need to make some measurements on the associated sample chosen pattern and the pattern available.
1. You need to know the volume of the top yoke - to see and within a quantity of stolbikov- pink line..
2. Know the amount of yoke on her bottom, a wide edge - to see and within a quantity of stolbikov- green line.
3. Know the length of the yoke of the chosen model to see the rapport and knit sample - brown line.
It depends on it:
a) how many columns need to increase (expand) a rapport pattern coquette in which rows repeat most convenient to perform the desired gain;
b) the yoke can be any length from top to bottom, and depending on whether it is being built, which depends on the pattern:
- Are we going to finish with a narrow (short) basque all details reglanovymi ubavkami towards the armholes;
- Whether we will arrange themselves to gain the armholes;
- Whether shortened rows on the need to move the base web, etc.
Example 1 Round yoke with zip front, sleeveless (deflated shoulder)
Consider a specific example, the pattern on the specific model.
Perform model with a flat shoulder formed long circular yoke, on the basis of a standard pattern with set-in sleeves for 48r-ra. Choose a pattern and provyazyvaem sample. All calculations are made on the basis of the pattern and knit pattern:
In a sample of 10x10 obtain 25.2 and Article 12.2 of the series. In one rapport - 6n and 4 rows. The circumference of the neck 50 cm. Recruit 126 ce 1, ie, we collect 21 rapport. From expanding settlements flirts we know that the initial number of loops increases by no more than 2.8 to three times, and stopped cm belt around the torso and arms must be lowered within the 130 plus or minus 10 loops, calculate to what the number of columns in the rapport we need to reach, extending yoke.
- Measurement, see the pattern on the tape gives 136-137sm that the pattern gives us (136h127p): 50cm = 345,4p. We recruited 21 rapport, then obtained the estimated number of loops we have to lead to a multiplicity of 21:
345.4: 21 = = 16,5petel 17petel one rapport on the bottom yoke.
Carefully look at our sample. At the height of the repeat in 4 rows and 19.5 cm length of the yoke, we need to link the 23 series, introducing uniform gain in the circuit line.
Linking flirt, proceed to the distribution of the yoke on the back and two shelves. We have 21 rapport. If we divide conventionally into 3 parts - one on the front and one on the back and the third, on both sleeves, we get to 7 repeats at 1 part that corresponds 7r.h17p = 119petel and backrest width have no armholes -. 39cm, which is equal to 6 repeats the extended scheme.
17ph6r = 102p. Check again: (39cm h127st.): 50cm = 99st.
So back in Division 6 repeats, on the shelves - 3 repeat on sleeve - on 4,5rapporta.
First, we need to extend the back - knit a complete rapport pattern in height to produce a "germ" - ie .. to "front" of the model is not "driving" up, do not ride up to the neck.
On average 6 repeats yoke that correspond to the back, provyazyvaem 4 rows of pattern. Now Knit Rapport obtained by expanding the pattern coquette
According to the pattern width of the backrest with armholes or equal 49,5sm 7,5rapporta. Let us add to the back by her sides armholes. To do this, knit 4th row back germ dovyazyvaem at the end of a number of chain of ce 5 cm long, make a loop lift and carry 0.75 rapport pattern on dovyazannoy chain 6 repeats the pattern back on the other side of the back is similar to add the width of the 2nd armhole, also include them in the pattern and knit the entire back length of 7.5 Rapport (0.75 + 6 + 0.75 = 7.5 rap.).
Then proceed to the implementation of one, then the second shelf:
Comments
Post a Comment
THANK YOU